13
V 06/17
4) The installation is complete when the product is properly attached to the wall as per the instructions and required safety
distances.
You can adjust the angle by loosening the two screws and then fastening them in the desired position.
HOW TO USE THE CARBON FIBER HEATER
Connect the power cord to a suitable electric socket (220-240V~/50Hz).
The image below shows the appliance's on/off switch. When the switch is on ( I ), the unit will turn on; when the switch is on
( O ), the unit will turn off.
Although the product is water-resistant, do not use it when it is raining or in wet conditions.
MAINTENANCE AND STORAGE
CAUTION: ALWAYS UNPLUG THE APPLIANCE BEFORE CLEANING OR MAINTENANCE OPERATIONS.
IMPORTANT: DO NOT SUBMERGE THE HEATER IN WATER.
Cleaning the outside surface of the appliance
Use a soft cloth to remove any dust from the product.
If the unit is excessively dirty, use a soft cloth dampened with water and neutral detergent at a temperature below 50°C.
Leave the heater to dry completely before using it again.
Do not use corrosive detergents or solvents such as petrol. Do not wash the appliance with water.
When cleaning the
appliance, do not use oils, chemical substances or other items that may damage the surface.
Use a vacuum cleaner to remove dust from the air inlet/outlet grilles.
STORAGE
If the appliance is not used for prolonged periods, it must be stored together with this manual in its original packaging, in a
cool and dry place.
M6*50 screw
