Subject to change · UMPC 045_31168300 · 0717 · EN
Page 20
www.argo-hytos.com
9.2
Data collection
The UMPC 045 is equipped with a data memory which internally stores up to 1,000 results. When the memory capacity has been
reached, the last measured value is stored and the oldest measured value is overwritten.
The memory capacity is expandable by using an SD card.
NOTE
A description of the installation and data transmission can be found in the OPCom user manual.
1. Connect a data cable to the USB (Type B) jack ("Fig. 9: Control panel" on page 18) pos. 7.
2. Connect this cable to a PC, laptop, tablet or smartphone on which the appropriate software is installed.
NOTE
The software can be downloaded from www.argo-hytos.com.
The stored results are transferred to the connected devices such as PC, laptop, tablet or smartphone and can be stored there.
Optionally, the data can be transferred to network-enabled devices via a wireless connection.
