Subject to change · UMPC 045_31168300 · 0717 · EN
Page 37
www.argo-hytos.com
16. Troubleshooting
16.1
Basic procedure
›
You should also be systematic and targeted under time pressure.
Random, unsupervised dismantling and adjustment of setting values can lead to the fact, that the original cause of the fault
cannot be detected anymore.
›
Get an overview on the function of the particle monitor OPCom Portable in connection with the overall system.
›
Try to find out whether the product has provided the required function in the overall system before the error occured.
›
Try to record changes to the overall system in which the particle monitor OPCom Portable is installed:
›
Have the operating conditions or the area of application of the particle monitor OPCom Portable been changed?
›
Have modifications (e.g. conversions) or repairs been carried out at the overall system (device / unit, electrics, control) or at the
product? If so, which modifications?
›
Has the product or the device been operated correctly?
›
How does the fault tend to show?
›
Get a clear impression about the cause of trouble. Possibly consult the direct operator.
If you cannot correct the error, please contact one of the contact addresses listed under www.argo-hytos.com.
If the device should not accept any more entries, turn it off briefly and then turn it on again after a few seconds. After initialization,
the particle monitor will operate as usual.
