22
Press the M button for at least two seconds to enter the configuration on the LCD.
Press the + and - buttons in the display configuration to change the value of each parameter;
press the M button to move to the next parameter; press the M button for at least two seconds
to exit the LCD configuration.
Km/Miles
Marked by the
S7
symbol, press the + and - buttons to switch from the Km/h to MPH display.
Display backlighting
Marked by the
b1
symbol, values allowed: 1-5.
Automatic display switch-off
Marked by the
0F
symbol, values allowed: 0-15. The set values correspond to minutes. If the
set value is 0, this function is not enabled.
If the value entered is a value between 1 and 15, the display will automatically switch off after
a set number of minutes.
Wheel diameter
Marked by the
Hd
symbol, values allowed: 6-34.
The set values correspond to the wheel diameter in inches. For your model, leave the value
on
28
, otherwise the values shown on the display when using your bike will be incorrect.
Password - Speed limit
Marked by the
Pd
symbol. Enter the password “1919” using the + and - buttons; confirm each
single value in the password entered using the M button.
After correctly entering the password, you access the speed limit parameter marked by the
SL
symbol, values allowed: 10-100.
Motor parameter
Marked by the
HL
symbol, make sure that the set value is the number
1
. If a different value is
set, the speed may not be correctly displayed.
9. LCD configuration