17
7. Maintenance instructions
All the maintenance operations must be carried out with the battery disconnected and
the bike resting on the stand.
After every routine maintenance operation, all the controls must be checked to ensure they
are working correctly. This manual does not provide any details about disassembly and non-
routine maintenance, as these operations must always and exclusively be carried out by the
Support Service staff of your authorised ARGENTO E-MOBILITY dealer.
The support service is able to provide all the indications and answer all the requests to care
for your EPAC and keep it in perfect working order.
Washing
Cleaning the EPAC is not just a question of decorum but also allows you to detect any defects.
To avoid damaging or compromising the function of the various components, especially the
electrical parts,
some precautions must be taken during cleaning. It is strictly forbidden to direct pressurised
water jets at the electrical parts, motor, display and battery; use a sponge instead.
Before starting the EPAC, dry it completely with low pressure compressed air and check that
there is no residual moisture left on the electrical components.
Lubricating the chain
It is important to lubricate the chain regularly to prevent excessive wear and prolong its use.
1. Clean all the links with a rag.
2. Spray all the links with a specific grease for drive chains.
Negative check
If even a single check is negative,
do not ride the EPAC.
Immediately take all measures to perform the necessary repairs and, if applicable, contact
your dealer’s support service.
WARNING
