Burn-out furnace APE800 and APE800a 2008-06-18
13
8.4. Launching the programme with a delay
In order to start the programme with a time delay one should follow the
undermentioned instruction.
sign
description
m
a
in
s
w
it
c
h
0
1
Turn on the power supply with the knob at the front of the temperature driver and wait
a moment till the box below appears.
m
a
in
b
o
x
This screen shows the current temperature in the furnace chamber. The temperature
must not be higher than 150
o
C.
to delay the start of programme no.
1
press and hold the following key
to delay the start of programme no.
2
press and hold the following key
la
u
n
c
h
d
e
la
y
With the keys
and
set the delay time counting in hours and confirm it with the
following key:
.
*the analogous situation concerns programme no. 2
p
ro
g
ra
m
m
e
n
o
.
1
While the delay function is in operation this state is indicated with the flashing sign S1
or S2. After this time the driver starts completing the default programme.
*the analogous situation concerns programme no. 2
8.5. Stopping the current programme
In order to stop the current programme one should follow the undermentioned
procedure.
sign
description
p
ro
g
ra
m
m
e
n
o
.
1
While the programme is in operation press the following key:
*the analogous situation concerns programme no. 2
p
ro
g
ra
m
m
e
s
to
p
Press the
key till the sign
appears, then press the following key:
.
m
a
in
b
o
x
The current programme will be stopped, the program selector will return to the main
box and it will show the current temperature in the furnace chamber.
WARNING: Another launching will be possible only after the temperature is lower than
150
o
C.
