Burn-out furnace APE800 and APE800a 2008-06-18
7
4. Basic technical parameters of the furnace
Nominal voltage
230V / 50Hz
Nominal power
2800W
Anti-electrocution protection
PE
Degree of protection
IP21
Maximum work temperature
800
o
C
Maximum temperature increase
10
o
C/min
Amount of programmes
2
Amount of cycles in the programme
16
APE800:
400 x 450 x 270[mm]
Furnace chaber dimensions
APE800a:
280x300x230[mm]
APE800:
700 x 640 x 530[mm]
Outer dimensions
APE800a:
500x530x570[mm]
APE800:
43kg
Integral mass of the furnace
APE800a:
38kg
5. Electric connection of the furnace
The furnace connection can be performed only by a qualified electrician and only with
the application of all security measures. The furnace is powered with the use of a three-wire
power grid with a single-phase current. The machine is equipped with a reinforced, single-
phase plug and a suitable socket.
L1
N
PE
8888
8888
Fig.2. Electric connection diagram.
6. First launching
If it is the first launching of the furnace it is advisable to dry the heating chamber. To
perform this action a short programme should be set on the program selector (the first
section). It covers heating with the maximum temperature increase up to 700
o
C. After the
temperature is reached, the furnace can be turned off. This function should be initiated
only in the target operating area of the furnace, with the activated travelator.
During the
first heating the insulating mats of the furnace will change their colour, which indicates
that the drying process proceeds in a correct way.
