Page 9
3. Familiarize yourself with the remote control unit. Check for proper operation of the
wired remote control unit. The functions are described below:
The
channel up and down arrows
change the channel up or down.
The
volume up and down arrows
change the volume up or down.
The
Input
button toggles between the various video input sources: TV,
Component, HDMI, etc.
The number
keypad
allows direct access to channels by entering the number
of the channel you want to watch. To operate, press the channel numbers
including the decimal point for the digital channels, then press
enter
.
Press the
back button
, and the channel will go back to the previous channel.
Press again to return to the first channel. This allows for one-touch switching
between two programs.
The
“PWR” button
turns the unit on and off.
The
phones arrow
points to the headphone jack located on the side of the
unit just below the keypad. Plug headphones into the jack to hear the sound
from your personal audio equipment.
If system is not functioning properly, turn the PVS off for one minute, then turn it back
on to re-initialize the system. This will
in most cases
reset any malfunctions with the
PVS. If you continue to have problems, please check the troubleshooting guide located
at the end of this manual. If not resolved or issue not covered in troubleshooting guide,
please call your dealer or contact Audio Resource Group.
