ARG ARG-PVS15, Manual And User Manual

Page: 13 / 23

Page 13
GENERAL CONNECTIONS
1. Connecting a Digital ATSC signal:

Make sure the PVS and the external device are powered off

Connect one end of a coaxial cable to the RF TUNER on the back of the PVS and then
connect the other end to the satellite TV jack.

Press INPUT on the wired controller or the AUTO switch on the side of TV to display the
Input Source Menu and then press Channel UP or Channel DOWN button to select TV .
Press ENTER .

ATSC Modulation: Air: 8-VSB; Cable: 64QAM, 256QAM Required signal: 0 +/- 8 dB

Video System: MPEG-2 MP@ML

Audio System: AC-3, MPEG1/2 Layer I and II

Basic Functions: Closed Caption & V-chip

Receive channel: Air:2-69; Cable: 1-135
2. Connecting a Standard AV Device or Apple ® Product:

Make sure the PVS and the external device are powered off

Connect a component cable (not included) into the VIDEO INPUT & AUDIO INPUT
jacks on the back of the PVS and then connect the other end of the cable to the AV
OUTPUT jack on the external device or Apple
®
Product.
Apple® is a trademark of Apple Inc.,
registered in the U.S. and other countries.

If you wish your PVS to have the ability to charge the media player or external device,
plug the USB plug into the USB port on the back of the PVS. The port will supply a
MAX charging current of 5V @ 2A.

Press INPUT on the wired controller or the AUTO switch on the side of TV to display the
Input source menu and then press Channel UP or Channel DOWN button to select
DOCK . Press ENTER .

YPbPr/YCbCr Support Formats: 480i, 480p, 576i, 576p, 720p, 1080i
3. Connecting an HDMI device

Make sure the PVS and the external devices are powered off

Connect one end of an HDMI cable to the HDMI INPUT jack on the back of PVS and
then connect the other cable end to the HDMI OUT jack on the external device

Press INPUT on the wired controller or the AUTO switch on the side of TV to display the
Input source menu and then press Channel UP or Channel DOWN button to select
HDMI . Press ENTER .

Supported Formats: 480i, 480p, 576i, 576p, 720p, 1080i
4. Connecting the Power Cord: Connect the power cord to the DC INPUT jack on the back of
the PVS and then connect the other end of the cable to a power outlet.