arf SLICK540 120E, Instruction Manual, Page: 34 / 46

For 30CC version,Engine, Exhaust, & Fuel System Installation
Engine Installation
NOTE: There are pictures of different planes in this manual, however, this plane’s engine is assembled the
same way.
1. Select the proper guide for your engine and drill the holes and cut out the center as indicated. Notice
that the engine center line is offset to the left to compensate for the right thrust built into the engine box.
2. Fit the Cowl and measure the distance from the engine bulkhead to the front of the cowl, add approx
2-3mm for the back plate and this is the length that your engine should be set Using the correct length