AG2500Series Software User’s Guide
June, 2002
25
Advanced - IP ROUTING
4.9 Advanced - IP ROUTING
Figure 4.8
IP ROUTING Page
Use the
IP ROUTING
page to create paths or routes for AresGate to forward data packets to their des-
tinations. You need to create an IP route when there are other routers on your LAN.
4.9.1 Current IP Routing Table
The Current IP Routing Table displays the index number (ID), Destination IP Address, Subnet Mask,
Gateway IP Address, and Interface for each IP route entry.
4.9.2 Add Route
Destination IP Address: The IP address of where data packets are to be sent.
Subnet Mask:
The subnet mask of the above Destination IP Address.
Gateway IP Address:
The IP address of the router on the LAN where data packets are to be sent. The
Gateway IP Address can only be set if the route uses the LAN interface.
Interface:
Determines data packets are to be sent through the Ethernet_LAN or WAN
interface.
When you are ready, click
Add
to enter a new IP route to the Current Routing Table.
4.9.3 Delete Route
Route ID:
To delete a route from the routing table, enter the associated ID number and
click the
Delete
button. Click
Cancel
if you do not wish to save configuration.
