manualshive.com logo in svg

ARESCOM AresGate 2560, Software User Manual

Share
Download
ARESCOM AresGate 2560 Software User Manual Download Page 26

Basic - STATUS

22

June, 2002

AG2500Series Software User’s Guide

Ethernet Port Statistics

Received Packets:

 

The total number of packets received on the Ethernet port.

Transmit Packets:

 

The total number of packets transmitted on the Ethernet port.

Overrun Packets:

 

The total number of receiver overruns.

Underrun Packets:

 

The total number of transmitter underruns.

Receive Loss Packets:

  The total number of packets lost.

Receive Bad Bytes:

 

The total number of bad bytes received.

Packets Truncated:

 

The total number of truncated packets received.

Packet CRC Errors:

 

The total number of packets received with an incorrect CRC.

ADSL

DSP Firmware:

Vendor ID:

SNR:

Attenuation:

Lcl Tx Power:

Line Mode:

Upstream:

Downstream:

Wireless LAN

Wireless Link:

Indicates whether or not there is a valid wireless connection between AresGate 
and other PCs.

SSID:

Displays the SSID of the AresGate device. 

Channel Number:

Displays AresGate’s current wireless channel number.

Transmit Packets: 

The total number of packets transmitted on the wireless interface.

Transmit Bytes: 

The total number of bytes transmitted on the wireless interface.

Received Packets: 

The total number of packets received on the wireless interface.

Received Bytes: 

The total number of bytes received on the wireless interface.

Summary of Contents for AresGate 2560





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands