10
June, 2002
AG2500Series Software User’s Guide
3. Verify your PC’s IP address:
It
MUST
be 192.168.10.X (where
X
is in the range of 2-254). To verify your PC’s IP address, please
follow the instructions below:
For Windows 95/98/ME users:
Step 1.
Click
Start
->
Run
.
Step 2.
Enter
winipcfg
and click
OK
to prompt the
IP Configuration
window.
Step 3.
Select the correct Ethernet or Wireless networking adapter in the white dropdown box.
Step 4.
If the IP address displayed in the
IP Address
box is not 192.168.10.X. (where
X
is in the range of 2-
254), you need to click
Release All
->
Renew All
buttons to have the correct IP address assigned from
your AG2000 to your PC.
For Windows 2000/XP users:
Step 1.
Click
Start
->
Run
.
Step 2.
Enter
command
and click
OK
to prompt the
Windows DOS
window.
Step 3.
Enter
ipconfig
and click
OK
. Windows will display the
Windows IP Configuration
information.
Step 4.
If the IP address displayed in the
IP Address
field is not 192.168.10.X. (where
X
is in the range of 2-
254), you need to enter
ipconfig /release
and then
ipconfig /renew
commands to receive a correct IP
address from the AG2000.
4. Verify your PC’s Internet Properties setting if you were previously using an analog
modem.
Please follow the steps below:
Step 1.
Click
Start
, point to
Settings
, and then click
Control Panel
.
Step 2.
Double-click
Internet Options
, and then click the
Connections
tab.
Step 3.
Click
Never dial a connection
, click
Apply
, and then click
OK
.
