AG2500Series Software User’s Guide
June, 2002
7
Setup Instructions
2.4 Setup Instructions
Before you start the setup process, make sure you follow the instructions below:
Step 1.
Disconnect the broadband service. Make sure your DSL broadband connection is shut down properly.
Step 2.
Turn off the power. Make sure the DSL modem and AresGate equipment are all turned off.
Step 3.
Connecting the external antenna.
Tightly attach the included external antenna to the antenna connector on the back
panel (For maximum range, make sure the antenna is perpendicular to the
ground).
Step 4.
Connecting to the LAN port.
Connect the RJ-45 to RJ-45 Ethernet cable (included) from the wired Ethernet LAN
(such as a PC, hub or switch) to the
LAN
port on the back of the AresGate.
Step 5.
Connecting to the DSL LINE port.
Connect the RJ-11 to RJ-11 telephone cable (included) to AresGate’s
DSL LINE
port
and the other end of the telephone cable to the telephone wall outlet, on which the DSL
service is activated.
Step 6.
Connecting to the POWER port.
Connect the AC power adapter to AresGate’s
POWER
port. Connect
the AC plug from the power adapter into a wall outlet or power strip.
