26
Tx/Rx Binding/Linking
Binding/linking is the process of programming the receiver
to recognize the Globally Unique Identifier (GUID) code of a
single specific transmitter. These steps outline the binding/
linking process of the 5-Channel Helicopter Transmitter
(AZSH2281) and receiver/control unit in the Nanos FP 75
Start by plugging in your fully charged battery to the 4-in-1
unit. You will notice a red blinking LED as soon as you plug in
the flight battery. While the LED is blinking, hold down the
right rudder trim button while turning on the transmitter.
When the red LED goes out you may release the right rudder
trim button and you should hear the servos center. This
indicates that you are now linked. Test the controls by moving
the right stick, making sure you have servo movement. Once
the control test has been done your FP75 is ready for flight
Press this button while turning on Tx
