20
If the helicopter tends to consistently roll or pitch in a
particular direction in 3-axis mode, it may be necessary to
mechanically trim the helicopter to achieve optimal flight.
If the helicopter tends to roll to the right in three-axis
mode, the servo pushrods should be adjusted so that the
swashplate leans further to the left. To do this, the right
pushrod should be lengthened by twisting the plastic piece
counterclockwise a number of turns. Then, the left pushrod
should be shortened by twisting the plastic piece clockwise
the exact same number of turns.
If the helicopter tends to roll to the left, the servo pushrods
should be adjusted so that the swashplate leans further to
the right. To do this, the left pushrod should be lengthened
by twisting the plastic piece counterclockwise a number
of turns. Then, the right pushrod should be shortened by
twisting the plastic piece clockwise the exact same number
of turns.
If the helicopter tends to pitch forward, the servo pushrods
should be adjusted so that the swashplate leans further
backward. To do this, both pushrods should be shortened by
Trimming in 3-Axis
Please note that the helicopter must be in 3-axis mode
for mechanical trim, and this trimming should never
be performed with the helicopter in 6-axis mode. Any
adjustments to 6-axis flight should be achieved by
using the cyclic trim buttons on the transmitter.
