Setting Mode
To enter setting mode, press the button for more than 1 second (“medium press”). The “RGB
back light” LEDs will start to flash white. The number of consecutive flashes indicates the mode
you are in.
Each medium press of more than 1 second will move the setting mode onto the next. When you
finish the setting modes, the clock returns to normal time display mode.
To exit
the setting mode before going through all the options, press the button for more than 2
seconds (“long press”). The “RGB back light” LEDs will return back to their normal operation.
Another way of exiting is to cycle through all of the setting options, after which you will return
to time mode.
To change a setting, press the button for less than one second, and then release it (“short
press”).
Mode
Description
Values
Time mode.
This is the normal mode and displays the time.
It is the normal start up mode of the clock. If you do nothing.
The clock is in this mode.
In this mode a short press cycles through the values given in
“Time Display Mode”, but always returns to the standard
time display after 5 seconds.
Time and Date Settings
Note that the Time and Date settings will not be shown if the WiFi module is
active! Instead you jump straight to the next section.
Set Hours.
Each short press will advance the hour. The
hours roll over back to zero after reaching 12 or 24
(depending on the 12/24 hours mode).
Set minutes.
Each short press will advance the minute.
The minutes roll over back to 0 ffter reaching 59 minutes.
Each time you set the minute, the seconds is reset to 0.
Reset seconds.
Each short press will reset the seconds to
0, without changing the hours or minutes.
Set Day.
Each short press will advance the day. The day roll
over back to one after reaching the maximum number of
days in the month.
Set Month.
Each short press will advance the month. The
month roll over back to zero after reaching 12.
Set Year.
Each short press will advance the year. The year
roll over back to 2015 after reaching 2099.
