p5
4.4 Programming menu
(according to options)
DISP
ANA
SECU
PrDI
SAVE
Access to the programming of the input
p5
Access to the programming of the sampling time of the
digital filtering and the resolution
p5
Access to the programming of the analog output
p6
Access to the programming of the output in case
p6
of self-diagnosis and/or sensor rupture, and
access to disconnecting the sensor rupture
Access to the display programming
p7
Access to the converter file name
p7
Access to the programming exit menu with or
p7
without saving the configuration
Note:
⇒
In mode programming, the instrument will automatically revert to measure
with the former configuration if no key is pressed during 1min.
NAME
INP
M
Note:
Press to go on to the next menu
Move through the menus / choice
Upwards move /
Increase
Validation / vertical move
Downwards move /
decrease
Menu exit / access
M
INP
INP
temperature input
# Changing this parameter requires re-
programming the parameters related to
the analog output
dOd I
,
FOd I
#
«
To
«
«
oF
oC
TEMP
«
CAPT
«
RTD
Available only in the case where a
shifting of the input has been ente-
red (see p14
).
If no shifting
«
YES
«
NO
«
ADJ
DISP
«
TYPE
4.4.2 Programming of the display
4.4.1 Programming of the input
DISP
M
DISP
Note:
Press to go to the menu
«
DISP
FILT: coefficient from 0 to 10
integration indice
«
0000
«
FILT
«
«
1o
0.1o
«
rES
display resolution
1 or 1/10th of degree
