p4
4. PROGRAMMING
4.3 Main menu
4.2 Orientation through the programming
The dialogue is ensured by 4 keys located on the front face.
Note:
In mode programming, the instrument will automatically revert to measure
with the former configuration if no key is pressed during 1min.
Mode reading
of the
configuration
(see p9)
If code correct,
access to the
programming
exit menu
(see p5)
If code
incorrect,
message
appears
Simulation
of the
analog
output
(see p10)
Authorized by
access code
Further functions can be accessed by pressing several keys
simultaneously:
Setting of the display down scale;
(see p12)
Setting of the display full scale;
(see p12)
Visualisation of the direct measure;
(see p12)
Reading convention:
Move through the main menu
Revert to previous menu
Blinking display: awaiting validation or setting
Alternating information display
Entering of a parameter:
First start by increasing of decreasing
the 1st digit and the sign: from -9 to +9.
The 2nd from 0 to 9.
The 3rd from 0 to 9.
The 4th from 0 to 9.
M
M
+
+
and
6
888
6
5
88
65
2
8
652
0
READ
PROG
CODE
NO
8 888
GENE
«
«
«
«
«
Programming
of the
access
code
(see p10)
Simulation
of
the
display
(see p10)
Authorized by
access code
PCOD
SIMU
«
«
Teleloading
of program-
ming files
(see p11)
LOAD
«
Exit from a sub-
menu to access
next menu /
access to the
programming
exit menu
Move through
the menus:
downwards, or
decrease the value
shown
Move through the
menus: upwards, or
increase the value
shown
Validation of
the displayed
parameter, or
access to a
submenu
scroll
menus
vertical
move
Entering of the access code.
The access to the programming
menu is protected by a 4-cipher
code.
The code is 0000 on factory exit (to
change this code,
see p10).
Between each entering, validate
the cipher with key
M
+
M
1 2 3 4
4 leds indicating the
status of the con-
verter relays (accor-
ding to the options
of the converter)
4-digit alphanumeri-
cal display
4 keys for access:
- to the reading or
the modification of
the programming
- to the converter
specific functions
Indication
of the
measure
sign or the
program-
ming para-
meters
2413
M
Display of the measure
(height: 5.0 mm)
Display of the measure
unit (height: 3.5 mm)
Display of the value
of the analog output
or the marking name
of the product (eg.:
TANK)
Indicates the activity
(measure) of the con-
verter
Indicates a communica-
tion on the RS485
Indication
of the alarm
status of
relay 1
Indication of
the
alarm status
of relay 2
Electroluminescent green display
Graphical LCD
-1.234
Bar
12.04mA
)) ))
.
♥
4 keys for access:
- to the reading or the modification of the programming
- to the converter specific functions
. .
