Pag.
46
OPERATING INSTRUCTIONS
ORIX 70
CAUTION!
1)
The safety tie-band must NOT be removed until the x-ray generator is aassembled.
2)
Loosen the fixing screw of covering tube using an appropriate screwdriver.
3)
Push upwards the covering tube till the brass half-moon holding the pivot of the tube head is discovered
4)
Remove the brass wedge from its holding.
5)
Holding the x-ray generator, insert the pivot inside the bush of the spring arm. Push upwards. Replace the
wedge in its place and check the perfect anchorage of the x-ray generator.Abbassare il canotto di
copertura e bloccare la vite di fissaggio.
6)
Lower the covering bush and lock the fixing screw.
No particular connection is required because both the x-ray generator and the holding bush are provided
with special coaxial electrical contacts.
2 3 4 5 6
