Pag.
45
OPERATING INSTRUCTIONS
ORIX 70
ASSEMBLY X-RAY GENERATOR AND PANTOGRAPH ARM
Withdraw the x-ray generator from its packing and check the integrity of the coaxial electrical contact.
Eliminate any probable remains of packing material
DESCRIPTION
1) X-ray generator
2) Cylindrical centering device
3) Lateral bracket
4) Pivot with contact
Check if the clutching pivot located on the lateral bracket, is lubricated, otherwise, put a slight layer of
metallic parts of the contact.
Mount, screwing clockwise, the cylindrical centering on the brass pipe of x-ray exit and block it by using the
suitable grain M5.
