32-36 INCHES DISTANCE
BETWEEN MOUNTING STRAPS
GENERAL PURPOSE MOUNTING STRAP
!
Design Modification Rights Reserved
•
D
ra
w
in
g
:
7
6
2
2
7
9
X
X
R
e
v
:
C
S
h
e
e
t:
3
o
f 1
5
E
n
g
:
0
9
/1
1
/1
7
INSTALLATION INSTRUCTIONS
Model: VT4806
D
E
F
D
a
te
D
ra
w
n
:
© 2018
When using electrical equipment, basic safety precautions should always be followed, including the following:
Read all instructions carefully before installing and save for future use.
•
Make sure all connections are in accordance with the National Electrical Code and local regulations.
•
To avoid possible electric shock, be sure the power supply is turned off before servicing or installing the fixture
•
Service should be performed by qualified personnel.
•
These instructions may not cover all details or variations. If additional information is needed, please contact 414.410.3600.
Model Series: Agriculture/Horticulture/Food Service
ON FIXTURE
LIP WHERE THE CLIP
SHOULD HOOK
CLIP HOOK
Measure 32" to 36" between mounting straps on mounting surface before installation.
1.
Failure to do so could cause the fixture to become detached from the mounting
hardware.
Attach mounting straps to desired surface, T-Bar, or unistrut using hardware (by others).
2.
Install fixture to mounting straps by hooking one side of the fixture housing. Make sure
3.
both hooks are clipped in before installing the other side of the clips.
Repeat step 3. Fixture should snap into place when pressure is applied. Be sure to
4.
check all (4) locations where the strap connects to the fixture. The clips should not be
sticking out.
Plug the fixture into power source.
5.