VMX Series Manual
page 73
rev 1.06
17. Backlight Timer and Power-down Mode
The Backlight Timer and Power Down Mode is used to have the HMI enter Power Down
Mode when it is not in operation. The Power Down Mode will adjust backlighting to a
lower level or shut down backlighting entirely to save energy and extend life expectancy
of the LED backlight.
Backlight Timer / Power Down Mode Registers
Code
Name
Description
Default value
Note
N65026
Time mode of
Backlight Timer
0 or 65535=off
30-65534 seconds
65535
Minimum
value is 30
N65050
Backlight
brightness
percentage
0-100 (percentage of screen brightness)
0
N65051
Backlight Mask
selection
Bit0: resume normal operations after
alarm
Bit1: resume normal operations after PLC-
controlled scene switch]
0
N65052 Scene ID
0: off
Non-zero: when entering power down
mode, the HMI will jump to the scene
containing the index matching this value.
0
N65053
Scene selection for
Backlight Timer/
Power Down
Mode
Bit0: switch of scene mask
Bit1: set to the minimum
Bit2: jump back to scene mask
0
N65347
Backlight Timer
controller
Bit0: update the time shown on Backlight
Timer
0
VIEWX allows the user to make these settings via the GUI.
Select [Project] from Menu Bar, and then click on [System Configuration]
[Power
Down Mode].
Summary of Contents for VMX Series
Page 1: ...VMX Series Manual page 1 rev 1 06 VMX Series Human Machine Interface Touch Screen Manual...
Page 8: ...VMX Series Manual page 8 rev 1 06 3 Dimensions VMX 30 Weight 0 18 kg VMX 51 Weight 0 55 kg...
Page 9: ...VMX Series Manual page 9 rev 1 06 VMX 70 Weight 0 75 kg...
Page 34: ...VMX Series Manual page 34 rev 1 06...
