VMX Series Manual
page 22
rev 1.06
1.
Select the controller you would like read data from. You can also select
internal HMI memory
2.
Select from the available parameters of the controller to read from. Note that
the data format of the object accessing the parameter must match the data
type of the parameter to avoid misinterpretation of data.
3.
Select from the possible variables given the selected parameter. In many
cases there is only one possibility.
c.
Max: Maximum allowable value for this object
d.
Min: Minimum allowable value for this object
Format
e.
Integer: The number of digits that are to be shown by the number display.
f.
Decimal Pos: The position of the decimal point (starts counting from right to
left).
g.
Leading Zeros: Check to prepend leading zeros to the value displayed in
order to keep the number of displayed digits the same at all times.
h.
DEC: Select to display data in decimal
i.
HEX: Select to display data in hexadecimal
j.
32 Bits Float: Select to display data in IEEE 32-bit floating point
Note: Any field that has a [Exp] icon can allow for a mathematical expression.
For example, instead of “2:EX” we can have “2:EX+1:EX”. This would display
the sum of both the [EX] parameters for both device 01 and device 02.
Note: The HMI does not support floating point arithmetic. No matter what the
declared type all mathematical operations will take the decimal form of the value
and perform a non-floating point operation.
1
2
3
Summary of Contents for VMX Series
Page 1: ...VMX Series Manual page 1 rev 1 06 VMX Series Human Machine Interface Touch Screen Manual...
Page 8: ...VMX Series Manual page 8 rev 1 06 3 Dimensions VMX 30 Weight 0 18 kg VMX 51 Weight 0 55 kg...
Page 9: ...VMX Series Manual page 9 rev 1 06 VMX 70 Weight 0 75 kg...
Page 34: ...VMX Series Manual page 34 rev 1 06...
