Arctiko BBR100, Operating Instructions Manual, Page: 7 / 36

Installing the appliance
Electrical Connection
1. Always allow an authorised electrician to install the appliance.
2. The appliance should be located in a cool, dry place out of direct sunlight. The appliance gives
off a great deal of heat when in operation. If the ambient temperature is too high there is a risk
that the appliance will not operate correctly. It is recommended that the room be ventilated so
that the room temperature does not exceed ambient temperature.
3. Place the appliance on a solid and flat substrate. This will eliminate any vibration an irritating
noise. The appliance should be placed with at least 10cm free to the sides, at least 16cm free at
the back.
The appliance meets current EU directives. Low voltage 2006/95/ EEC.
Electromagnetic compatibility 2004/108/
EEC.
Only use the appliance for its specific purpose
The appliance should be given extra protection in accordance with Electricity Supply Regulations in
order to protect the user against dangerous electric shocks in the event of faults.
If the switch is for three-pin plug, a three-pin plug should be used and the conductor with yellow/green
insulation connected to the Earth terminal.
Data regarding voltage and absorbed power/current is given on the rating plate. (see page 27)
Electrical connection must be made in accordance with the local regulations.
Information
This appliance contains a mixture of various refrigerants. For more information please se the plate
affixed to the refrigerator. (see page 27)
7