GENERAL INFORMATION
21
ADJUSTABLE BACKREST
The adjustable backrest is designed
for maximum comfort and safety.
When riding double, the backrest
must be adjusted to the most rear-
ward position. When riding single,
the backrest should be moved for-
ward to a position comfortable to the
operator. Be sure to maintain the
backrest pad in a vertical position in
all locations. Also, be sure to tighten
all retaining knobs securely after
adjusting the backrest.
0734-425
REMOVABLE REAR SEAT
Some snowmobiles are equipped
with a removable rear seat to allow
for additional cargo space when no
passenger is being carried. To
remove the rear seat, use the follow-
ing procedure:
1. Move and lock the adjustable
backrest in the forward posi-
tion.
2. Pull back on the seat latch han-
dle located at the bottom rear of
the seat.
3. Lift on the back of the seat and
move it rearward to remove it
from the tunnel.
0735-854
To install the rear seat, use the fol-
lowing procedure:
1. Place the seat into position on
the tunnel making sure the two
pins on the front of the rear seat
are properly engaged with the
receiving tabs on the rear of the
front seat.
2. Pull back on the seat latch han-
dle; then with the seat latch
handle pulled back, push the
rear seat forward and down and
release the seat latch handle.
! WARNING
Moving the backrest forward
limits the seating capacity to
one person only.
! CAUTION
On models equipped with a seat
warmer, disconnect the warmer
wiring harness prior to fully
removing the seat.
! WARNING
M a k e s u r e t h e r e a r s e a t i s
securely locked in place before
carrying a passenger or per-
sonal injury may result.
Summary of Contents for Z Series 2006
Page 1: ...2006 Snowmobile Operator s Manual p n 2257 327...
Page 86: ...NOTES 85 NOTES...