Arctic Cat BEARCAT F5, Operator'S Manual

Page: 34 / 72

30
741-335A
On the F5/F570, turn the handlebar to the
right; then from the right side, pump
grease into the steering arms until grease
is noted coming out of either end of the
arms. Wipe excess grease from the arms.
0741-440
Rear Suspension
This procedure should be done every 40
operating hours.

NOTE: Arctic Cat recommends
that Arctic Cat All-Temp Grease (p/n
4639-365) be used for this proce-
dure.

NOTE: Illustrated are the general
locations of grease fittings. Actual
locations will vary from model to
model.
1. Shut engine off and wait for all mov-
ing parts to stop.
2. With the gas tank nearly empty (less
than 1/4 full) and using Handlebar
Stand (p/n 5639-152) or a suitable
substitute, lay the snowmobile on its
left side.
0741-376
3. Lubricate the grease fittings with all-
temperature grease.
F5/F570