manualshive.com logo in svg

Arctic Cat 350, Manual

Share
Download
Arctic Cat 350 Manual Download Page 56

54

54

54

54

6. If using the CTEK XS 800, there are

no  further  buttons  to  push.  If  using
the  CTEK  MXS  3600,  press  the
Mode  button  (A)  at  the  left  of  the
charger 

until 

the 

Maintenance

Charge  Icon  (B)  at  the  bottom  illu-
minates. The Normal Charge Indica-
tor  (C)  should  illuminate  on  the
upper portion of the battery charger.

800A

3600A

NOTE:  The  maintainer/charger  will

charge the battery to 95% capacity at
which  time  the  Maintenance  Charge
Indicator  (D)  will  illuminate  and  the
maintainer/charger  will  change  to
pulse/float maintenance. If the battery
falls below 12.9 DC volts, the charger
will  automatically  start  again  at  the
first step of the charge sequence.

NOTE:  Not  using  a  battery  char-

ger  with  the  proper  float  mainte-
nance  will  damage  the  battery  if
connected over extended periods.

Charging

NOTE:  Arctic  Cat  recommends

the  use  of  the  CTEK  XS  800  or  the
CTEK MXS 3600 for battery mainte-
nance charging.

1. Be  sure  the  battery  and  terminals

have  been  cleaned  with  a  baking
soda and water solution.

NOTE:  The  sealing  strip  should

NOT  be  removed  and  NO  fluid
should be added.

2. Be  sure  the  charger  and  battery  are

in a well-ventilated area. Be sure the
charger  is  unplugged  from  the  240-
volt electrical outlet.

3. Connect  the  red  terminal  lead  from

the  charger  to  the  positive  terminal
of the battery; then connect the black
terminal  lead  of  the  charger  to  the
negative terminal of the battery.

4. Plug  the  charger  into  a  240-volt

electrical outlet.

5. By pushing the Mode button (A) on

the left side of the charger, select the
Normal  Charge  Icon  (E).  The  Nor-
mal  Charge  Indicator  (C)  should
illuminate  on  the  upper  left  portion
of the charger.

6. The battery will charge to 95% of its

capacity  at  which  time  the  Mainte-
nance Charge Indicator (D) will illu-
minate.

NOTE: For optimal charge and per-

formance,  leave  the  charger  con-
nected to the battery for a minimum 1
hour  after  the  Maintenance  Charge
Indicator  (D)  illuminates.  If  the  bat-
tery  becomes  hot  to  the  touch,  stop
charging. Resume after it has cooled.

8. Once  the  battery  has  reached  full

charge,  unplug  the charger from the
240-volt electrical outlet.

NOTE:  If,  after  charging,  the  bat-

tery  does  not  perform  to  operator
expectations,  bring  the  battery  to
an  authorized  Arctic  Cat  dealer  for
further troubleshooting.

Summary of Contents for 350







































































Reviews:

No comments

Brands by name

Popular brands

Load more brands