37
37
37
37
D
ivi
si
o
n
II
-
O
p
er
at
io
n
/
M
ai
n
te
n
an
ce
Steering Lock
ACE-019A
This model is equipped with a steering
lock located at the base of the steering
post next to the frame. To lock the steer-
ing, turn the handlebar fully left, insert
the key into the lock, and turn key coun-
terclockwise; then remove the key. To
unlock the steering, insert the key into
lock and turn the key clockwise; then
remove the key.
Gas Tank Valve (350)
The gas tank valve is incorporated in the
gas tank. There are three positions: ON,
RES, and OFF.
In the OFF position, the valve will not
allow gasoline to flow to the carburetor.
In the ON position (the normal operating
position), gasoline will flow from the
tank to the carburetor. In this position,
2.46 L (0.65 U.S. gal.) will remain in the
tank as a reserve quantity.
Moving the valve to the reserve (RES)
position will allow the operator to use the
remaining gasoline in the tank. When
turning the valve to any of the three posi-
tions, be sure the indicator is pointed
directly at the position desired.
Shift Lever
ACE-022A
This ATV has a dual-range automatic
transmission with reverse.
Drive Select Switch (425)
ACE-024B
This switch allows the operator to oper-
ate the ATV in either two-wheel drive
(rear wheels) or four-wheel drive (all
wheels). For normal riding on flat, dry,
hard surfaces, two-wheel drive should be
sufficient. In situations of aggressive trail
conditions, four-wheel drive would be
the desired choice.
To either engage or disengage the front
wheels, move the switch to the 4WD
position or to the 2WD position.
! WARNING
Never leave the valve in the ON or
RES position when the engine is not
running.
CAUTION
Do not attempt to either engage or
disengage 4WD while the ATV is
moving.
