ARCIMOTO FUV 2022, Owner'S Manual

Page: 110 / 194

page 108
FUV Owner's Manual (REV 0) • last revised: 3/31/2022 • part# 006290 • docID: P10001
Turn the FUV ON
Before the FUV can be started, it must first be turned ON.
There are two ways to turn the FUV ON:
Key Switch - Insert the Key and turn the
Key switch to the ON position.
PIN entry on the Display - Touch the
Display to invoke the PIN entry page.
Enter the 6-digit PIN for your FUV and
press ENTER.
Refer to the Working With PINs
section on page 81 for details.
When the FUV is turned on (either via the Key or the
Enter PIN keypad on the Display), the first screen
displayed is the Arcimoto logo screen
In a few seconds, the Startup Screen displays, providing
visual instructions and queues to start the FUV.
START the FUV
Note that the Motor Off telltale lights for 2-3
seconds after the FUV is turned ON, while the
FUV is electrically prepared for driving. When
this light turns off, the FUV is ready to go.
1. Sit down in the FUV, and fasten the front seat
belts .
If the Driver's seat belts are not fastened
when the FUV is powered up, the seat belt
Warning
indicator is illuminated on the
Display.
NOTE
As a safety feature, both front seat belts must be latched for the
FUV to allow motion.
2. Set the Direction switch on the right grip to Neutral
(•).
OPERATION