ARCIMOTO FUV 2022, Owner'S Manual

Page: 33 / 194

SAFETY
Automatic Shutoff
The following safety features allow for automatic shutoff
of the high-voltage (HV) electrical system.
l
High- Voltage Safety Fuses — In the event of a
high-current short circuit, one or more high-voltage
fuses will open, disabling the HV system.
l
High-Voltage Interlock Circuit — If a high-voltage
connector is disconnected, the high- voltage
interlock circuit opens and disables the HV system.
l
Emergency Cut Loop — Whenever the Emergency
Cut Loop is cut, the HV system is disabled.
l
BMS Sensors — The Battery Management System
(BMS) continuously monitors the condition of the
batteries and will disable the HV system if the
battery temperature, state of charge or cell balance
is outside of normal parameters.
l
Inertia Switch – In the event of a collision or severe
jarring of the vehicle, an inertia switch disables the
HV system.
l
VCU - The Vehicle Control Unit (VCU), a
supervisory circuit, constantly monitors the
vehicle’s performance and will disable the HV
system
if it detects a potentially dangerous
condition.
If the FUV Is In an Accident
NOTE
First responder information is provided in the Emergency
Response Guide and QRS , available at www.arcimoto.com .
In the event that the FUV is involved in an accident,
contact
24/7 Arcimoto Roadside Assistance at
(866) 235-3920.
l
Always assume the high voltage (HV) battery and
associated components are energized and fully
charged.
l
Exposed electrical components, wires, and HV
batteries present potential HV shock hazards.
FUV Owner's Manual (REV 0) • last revised: 3/31/2022 • part# 006290 • doc ID: P10001 page 31