72-DVT30N-2
38
GLASS DOOR REMOVAL
WARNING:
Do not attempt to remove the glass door when the appliance is hot.
1.
Remove the top louver by pulling the entire louver assembly towards you.
2.
Open bottom hinged louver .
3.
Locate the 2 buckle latches under the door frame (Fig.1) and pull down the lever on the
back of the latches to release them.
4.
Unhook the latches from the bottom of the door and swing the bottom of the door
towards you then lift up on the whole door to unhook the top of door. Carefully remove
the door and put it away at a safe location where it cannot be scratched or damaged.
Replacing the Glass Door
Reverse the above procedure.
WARNING
: Do not operate appliance with the glass front removed, cracked or broken.
Replacement of the glass should be done by a licensed or qualified service person. Do not
abuse the glass doors, such as striking or slamming shut.
Only doors certified with the appliance shall be used.
Buckle latch
Buckle latch
Top of door
hooks onto
fireplace
Fig. 1.
If Your Glass Breaks
In the event your glass cracks or breaks, replace the original door
assembly with an Ambiance replacement door assembly (part
number 813
-
0075). The glass door and frame assembly must be
replaced as a complete unit. Remove the barrier screen and
remove door as per the instructions above. Replace with new
door assembly and reinstall the barrier screen.
NOTE:
the NEW door will emit some odor when the appliance is
lit. The odor will dissipate after the gasket material within the
door has cured. Be sure there are no fingerprints left on the glass
panels as high temperatures can bake these prints on
permanently.
Warning:
Only doors certified with the appliance shall be used.
Do not use substitute glazing materials.
