Dishwasher / User’s Manual
49 / 61 EN
Operating the Product
menu without saving.
Factory Settings?
Proceed as indicated below to cancel
all of your personal settings and
restore the factory settings:
1. Press Function b key (see. Section
5, Operating the Appliance)
Following message will be
displayed upon pressing the key.
2. Press Function b key (see Section
5, Operating the Appliance) to
save the change, or press Function
a (see Section 5, Operating the
Appliance) to exit the menu without
saving.
Warning messages
Your machine will give you some
important feedbacks while it is running.
Check the filter
Take out and clean your filters as
explained in the "Maintenance and
cleaning" section when you get a
'check the filter' warning.
If there is water remained in the tank,
ensure that the water in the tank is
discharged by applying Programme
cancelation process. If water cannot be
discharged, clean any leftover deposits
that have piled up in the bottom of the
tank and blocked the water path.
Clean the interior of your machine
and the tank by running a prewash
programme without detergent or a long
washing programme with detergent
based on the degree of dirtiness.
Salt indicator ( )
Please check the salt indicator on
the display to see whether there is
adequate amount of softening salt
in the dishwasher or not. You need
to refill the salt reservoir with salt
whenever salt indicator appears on the
display of your machine.
Rinse Aid indicator ( )
Please check the no rinse aid indicator
on the display to see whether there is
adequate amount of rinse aid in the
dishwasher or not. You need to refill
the rinse aid dispenser with rinse aid
whenever the ‘no rinse aid’ warning
symbol lights.
C
Rinse aid warning will go
off automatically once the
programme is started.
Water Cut-off indicator ( )
Water Cut-off warning indicator will
light when the machine cannot take
in water and "No water!" warning is
displayed on the Display Information
line. When the water is supplied
again, the warning light will turn off
automatically.
A
Make sure that the water
is not cut-off and the tap is
not closed when the Water
Cut-off warning light is
illuminated. Call Authorised
Service Agent if water is not
cut-off and the tap is open.
Call service
