12 / EN
Dryer / User Manual
Installation
3.4 Connecting to the drain
In products equipped with condenser unit, water
accumulates in the water tank during the drying cycle.
You should drain accumulated water after each drying
cycle.
You can directly drain accumulated water through the
water drain hose supplied with the product instead of
periodically draining the water collected in the water
tank.
Connecting the water drain hose
1-2
Pull hose at the behind of the dryer by hand in order
to disconnect it from where it is connected. Do not use
any tools to remove the hose.
3
Connect one end of the drain hose supplied with the
dryer to the connection point from where you removed
the hose of the product in previous step.
4
Connect the other end of the drain hose directly to the
wastewater drain or to the washbasin.
1
3
4
2
A
Hose connection should be made in a safe
manner. Your drain house will be flooded if
the hose comes out of its housing during
water discharge.
C
Water drain hose should be attached to a
height of maximum 80 cm.
C
Make sure that the water drain hose is not
stepped on and it is not folded between
the drain and the machine.
3.5 Adjusting the feet
In order to ensure that the dryer operates more silently
and vibration-free, it must stand level and balanced on
its feet. Balance the machine by adjusting the feet.
Turn the feet to left or right until the dryer stands level
and firmly.
C
Never unscrew the adjustable feet from
their housings.
3.6 Electrical connection
For specific instructions for electrical connection
required during installation
(see 2.1.1 Electrical
Safety)
3.7 Wireless Network Settings
Your appliance and the application should be connected
for application to be usable.
To establish this link , follow the instructions below.
First installation:
1. Press and hold Anti Creasing/Settings buttons of your
machine for 3 seconds to enter settings menu to adjust
wireless network settings.
Installation
