23 / EN
Dryer / User Manual
Operating the product
5.10 Starting the program
Press the Start/Stand-by button to start the
program.
Indicating start of the program, Start symbol turns
on, “ ” separator in the middle of remaining time
keeps flashing. Drying and program progress bar
are displayed alternately on the screen.
5.11 Program progress status
Drying
5.12 Child Lock
The machine has a child lock which prevents the
program flow from being interrupted when the buttons
are pressed during a program. When the child lock is
activated, all buttons on the panel except the
On/Off/
Cancel
button are deactivated.
To activate the child lock, keep the
Buzzer Selection
Button / Child lock button
pressed for 3 seconds.
The child lock has to be deactivated to be able to start
a new program after the current program is finished or
to be able to interfere with the program.
To deactivate
the child lock
, keep the same buttons pressed for 3
seconds.
C
When the child lock is activated, the lock
symbol on the screen turns on.
Child Lock : On
C
Child lock deactivates when the machine
is turned off and on by the On/Off/Cancel
button.
When the child lock is active:
• The machine runs, or in stand-by state the indicator
symbols won’t change upon changing the position of
the program selection button.
5.13 Changing the program after it is
started
You can change the program you selected to dry your
laundry with a different program after the machine starts
running.
• For example, to select Extra Dry instead of Iron Dry,
pause the program by pressing the
Start / Stand-by
button.
• Select the Extra Dry program using the
Program
Selection
button.
• Press the Start/Stand-by button to start the program.
Adding and removing clothes during stand-by
If you want to add or remove clothes to/from the
machine after the drying program starts:
• Press the
Start/Stand-by
button to put the machine in
Stand-by state. The drying operation stops.
• Open the loading door while in
Stand-by
state, and
close the door after you remove or add laundry.
• Press the
Start/Stand-by
button to start the program.
C
Adding laundry after the drying operation
starts may cause the dried laundry inside
the machine to mix with wet laundry and
leave the laundry damp at the end of
operation.
C
Adding or removing laundry during drying
may be repeated as many times as you
wish. But this operation continuously
interrupts the drying operation, and thus
increases program duration and energy
consumption. So, it is recommended to
add laundry before the program starts.
C
If a new program is selected by turning
the program selection knob while the
machine is in stand-by; the running
program terminates and new program
information is displayed on the screen.
WARNING:
Do not touch the inner
surface of the drum while adding or
removing clothes during a continuing
program. The drum surface is hot.
