11 / EN
Dryer / User Manual
3
Installation
Before the calling the nearest Authorized Service for the
installation of the dryer, ensure that electrical installation
and water drain is appropriate referring to the user’s
manual.
(See 3.4 Connecting to the drain
and
3.6 Electrical connection)
If they are not suitable,
contact a qualified electrician and technician to make
necessary arrangements.
C
Preparation of the dryer's location
as well as the electrical and waste
water installations is under customer's
responsibility.
A
Prior to installation, visually check if the
dryer has any defects on it. If the drier
is damaged, do not have it installed.
Damaged products cause risks for your
safety.
A
Let your dryer wait for 12 hours before
starting to use it.
3.1 Appropriate installation location
• Install the dryer on a stable and level surface.
• Dryer is heavy. Do not move it by yourself.
• Operate your dryer in a well ventilated, dust-free
environment.
• The gap between the dryer and the surface should
not be reduced by the materials such as carpet, wood
and tape.
• Do not cover the ventilation grills of the dryer.
• There must not be a lockable, sliding or hinged door
that may block the opening of the loading door in the
place where your dryer is to be installed.
• Once the dryer is installed, it should stay at the same
place where its connections have been made. When
installing the dryer, make sure that its rear wall does
not touch anywhere (tap, socket, etc.).
• Place the dryer at least 1 cm away from the edges of
other furniture.
• Your dryer can be operated at temperatures between
+5°C and +35°C. If the operating conditions fall
outside of this range, operation of the dryer will be
adversely affected and it can get damaged.
• Your product shall run with a connection to the
wireless network in your house. The controls made on
the HomeWhiz application will be provided over this
network, so the wireless signal reception where the
machine is located should be sufficient.
B
Do not place the dryer
on the power
cable.
3.2 Removing the transportation
safety assembly
A
Remove the transportation safety assembly
before using the dryer for the first time.
Open the loading door.
There is a nylon bag inside the drum that contains a
piece of styrofoam. Hold it from its section marked with
XX XX
.
Pull the nylon towards yourself and remove the
transportation safety assembly.
A
Check that no part of the transportation
safety assembly remains inside the drum.
3.3 Under counter installation
This product can be installed under a counter if the
height of the counter is sufficient.
A
While using undercounter dryer, it should
never be operated without undercounter
installation part. For the appropriate
undercounter installation part contact the
Authorized Service.
Dryer Depth
60 cm
54 cm
Stock number
of under-bench
installation part
2979700200
2973600200
Leave at least 3 cm of space around the sides and the
rear wall of the dryer when installing it under a counter.
C
If installed under a countertop, drying
durations can extend.
