22 / EN
Dryer / User Manual
Operating the product
5.9 Warning symbols
C
Warning symbols may vary depending on
the model of your machine.
Fibre filter cleaning
When the program is completed, the warning symbol for
filter cleaning turns on.
C
Refer to “Troubleshooting” section if filter
cleaning symbol constantly flashes.
Water tank
When the program is completed, the warning symbol to
empty the water tank turns on.
If the water tank fills up while the program continues,
the warning symbol starts flashing and the machine
goes into stand-by. In this case, empty the water tank
and start the program by pressing the Start / Stand-by
button. Warning symbol turns off and program resumes.
Cleaning the filter drawer
Warning symbol flashes periodically to remind that filter
drawer must be cleaned.
Loading cover is open
Following warnings are displayed respectively if the
loading cover of the drying machine is open.
Door is open
Program Paused
Delay Setting
• You can delay the end time of the program up to 24
hours with the
Delay Setting
function.
• Open the loading door and place the laundry.
• Select drying program, spin cycle and if needed,
additional functions.
• Press the
Delay Setting
selection button and set the
delay time you wish.
Delay Setting
symbol turns on.
(When the button is pressed and hold pressed,
Delay
Setting
proceeds non-stop).
• Press the
Start / Stand
-by button.
Delay Setting
countdown starts and Delay Activated and Program
Started messages are displayed on the screen. “:”
Separator in the middle of displayed delay time flashes.
Program Started
End Time Enabled
C
You can add or remove laundry within
delay time. Delay Setting symbol will turn
off at the end of countdown, drying starts
and duration of program is displayed.
Displayed time is the sum of normal
drying time and delay time.
Changing the delay time
• If you want to change the duration during the
countdown:
• Press the
On/Off/Cancel
button for 3 seconds to
cancel the program. Turn on the machine again and
repeat the Delay Setting process for the duration you
wish.
• When your machine is turned on for the first time, it
turns on with the declaration program (cotton wardrobe
dry).
• Cancelling the Delay Setting function
• If you want to cancel the Delay Setting countdown and
start the program immediately:
• Press the
On/Off/Cancel
button for 3 seconds to
cancel the program.
• Press the
On/Off/Cancel
button to start you
previously selected program.
