ARCBRO Stinger Series User Manual Download Page 19 | Manualshive

Page: 19 / 77

ARCBRO Stinger Series User Manual Download Page 19

Service Support Spirit

Unique Solution

WWW.ARCBRO.COM

19

3.2.6.1.

【

F1

】

CONTOUR

Fig. 3.6.1 CONTOUR interface

The user before processing, can be determined by taking the contour line, the machining path
is beyond the scope of the steel sheet.
Press [F1] key to start walking contours, if not on the current torch reference point (coordinates
not zero), the system will prompt:
The current point positioning --- will torch the current position as a reference point.
Reference point location --- torch to return to the reference point, and then began
to walk contour.
When walking contours, if the torch over the range of steel, according to the [Pause] key to
move the position of the torch to the plate edge, then press [Start] button,
Then the system prompt: Modify the reference point "EN / ESC?" Press Enter to confirm the
reference point if changed, the current location will continue to operate as a contour line. Press
[ESC] to abandon changes. This operation can be repeated
many times do run until the position you prefer.

«
...
17
18
19
20
21
...
»

Summary of Contents for Stinger Series














































































Reviews:

No comments