DV88
6
Confi guring your DVD player
Introduction
Congratulations – if you have followed the installation
instructions then the required connections to other equipment
will have been made. It is now essential to go through an
initial set up procedure to ensure the DVD player is confi gured
correctly for use.
Switching the power on
Press in the POWER button on the front panel. The power LED
above the switch lights green.
Obtaining a TV picture
Ensure the TV is switched on and that you have selected the
correct TV input. You should see the following image. This is
the image that the DVD player gives whenever there is no movie
playing.
To protect your screen from damage caused by persistent
static images, a ‘screen saver’ facility moves the Arcam and
DVD logos around the screen after a certain delay.
Using the setup menus
If you have not already done so, now would be a good time to
fi t the two AAA batteries in the remote handset, taking care to
get them the correct way round. Select ‘DVD’ using the CD/DVD
button on the remote control.
Ensure that no disc is playing and press
SETUP
on the remote
control: a menu appears on the TV screen.
The ‘Setup’ menu is arranged into three pages. The top line
of each shows the current page. To make a change, use
the
UP/DOWN
controls to highlight the item, then use the
LEFT/RIGHT
controls to change the setting.
To change page, highlight the page bar at the top of the screen
and use the
LEFT/RIGHT
controls to move through the pages.
In the ‘Setup’ menu, the
LEFT/RIGHT/UP/DOWN
controls ‘wrap
around’, so that with the highlight bar at the bottom of the
screen, pressing
DOWN
takes the bar to the top of the screen.
Operational setup
O p e r a t i o n
1 / 3
S u b t i t l e
:
O f f
A u d i o
:
E n g l i s h
- - - -
V i e w a l l
O n
O S D :
P a s s w o r d
:
R a t i n g
:
Subtitle
This setting controls the subtitles displayed on the TV.
Off
No
subtitles
Auto
Subtitles for the Primary language on the disc
English English
subtitles
Arabic
Arabic subtitles, etc...
(17 languages are supported)
Note that some discs may force the subtitles on regardless of
how this is set.
The default setting for this is ‘Off’. Alternatively, choose the
setting for the language you prefer. Note that not all discs will
have your preferred language as a subtitle.
Audio
This controls the default audio track, when there is more than
one audio track present.
‘English’ English language, if available
‘Arabic’
Arabic language, if available, etc…
(17 languages are supported) The default setting is ‘English’.
Choose the setting you would like as a default.
Password
The password setting works in conjunction with the rating
setting (the next menu item), to provide a means of limiting
content playback by children (parental control).
You will see there are four dashes and a padlock symbol.
Normally the padlock symbol will be open and this means the
parental control is unlocked. Under this condition the rating
setting may be freely changed.
To lock the parental control, choose a suitable four digit number.
Don’t forget your password as you will need to know it to unlock
the player. Highlight ‘Password’ and enter your four digit number
using the numerical keys on the handset.
When all four digits have been entered, press OK on the
handset. The player is now locked and you will not be able to
change the rating setting.
To unlock the parental control, highlight ‘Password’ and enter
your four digit number, followed by
OK
.
NOTE
: You can change the password any time you lock the
player.
DV88 multi.id
03/29/01, 12:48 PM
6