20
21
E
n
g
li
sh
Technical specifications
General
Power Requirements
115V or 230V AC, set by voltage selector switch on rear panel
Power consumption
< 45 VA
Dimensions
430mm x 90mm x 280mm
Weight
net: 6.2kg; packed: 7.8kg
Video outputs
Composite video
1 x gold plated phono: 1V pk-pk into 75
Ω
S-Video
1 x 4-pin mini-DIN: Y 1V pk-pk in 75
Ω
, C 0.3V pk-pk into 75
Ω
Component video
3 gold plated phono sockets:
Y 1V pk-pk into 75
Ω
; Pb 0.7V pk-pk into 75
Ω
; Pr 0.7V pk-pk into 75
Ω
.
SCART socket with RGB video
All 0.7V into 75
Ω
, composite video 1V into 75
Ω
, and stereo audio.
Auto switching of TV with aspect ratio control
Progressive scan video
Pure Progressive™ motion adaptive 4-field processing by Silicon Image Corporation
3 gold plated phono sockets:
525P component video. Y 1V pk-pk into 75
Ω
; Pb 0.7V pk-pk into 75
Ω
;
Pr 0.7V pk-pk into 75
Ω
Audio outputs
Analogue audio outputs
Two pairs of stereo outputs on gold plated phono sockets
Output level
2.2V rms at 0dB signal
Frequency response
20Hz to 20kHz (+0.1db, –0.5dB)
THD+N
<0.005% for 1kHz 0dB signal, measured 22Hz–22kHz, unweighted
S/N
105dB, measured 20Hz–20kHz, unweighted
Digital audio output (IEC958)
PCM/Dolby digital/MPEG/DTS on gold plated phono (coaxial) and TOSLINK (optical)
Accessories supplied
CR-314 remote control
2 x AAA batteries
Mains lead
E&OE
Continual improvement policy
Arcam has a policy of continual improvement for its products. This
means that designs and specifications are subject to change without
notice.
NOTE
: All specification values are typical unless otherwise stated.
Summary of Contents for DV27
Page 2: ...2 ...