manualshive.com logo in svg

Arcadyan Technology Corporation WG4005D-ZZ, Manual, Page: 91 / 100

Share
Download
Arcadyan Technology Corporation WG4005D-ZZ Manual Download Page 91

Troubleshooting

81

If you have an IP address that starts with 169.254.xxx.xxx then 
see the next section. 

If you have another IP address configured, then see section C. 

B. I am getting an IP Address that starts with 

169.254.xxx.xxx. 

If you are getting this IP address, then you need to check that 
you are properly connected to the Wireless 11g Router. 

Confirm that you have a good link light on the Wireless 11g 
Router for the port to which this computer is connected. If not, 
please try another cable. 

If you have a good link light, please open up a DOS window as 
described in the previous section and type ipconfig/renew. 

If you are still unable to get an IP address from the Wireless 11g 
Router, reinstall your network adapter. Please refer to your 
adapter manual for information on how to do this. 

C. I have another IP Address displayed. 

If you have another IP address listed then the PC may not be 
configured for a DHCP connection. Please refer to “Configuring 
Client TCP/IP” on page 14 for information.

 

Once you have confirmed that your computer is configured for 
DHCP, then please follow the steps below. 

1.

Open a DOS window as described above. 

Summary of Contents for WG4005D-ZZ





































































































Reviews:

No comments