Installing the Wireless 11g Router
10
Attach to Your Network Using Ethernet Cabling
The four LAN ports on the Wireless 11g Router auto-negotiate
the connection speed to 10 Mbps Ethernet or 100 Mbps Fast
Ethernet, and the transmission mode to half duplex or full duplex.
Use twisted-pair cable to connect any of the four LAN ports on
the Wireless 11g Router to an Ethernet adapter on your PC.
Otherwise, you can cascade any of the LAN ports on the
Wireless 11g Router to an Ethernet hub or switch, and then
connect your PC or other network equipment to the hub or
switch. When inserting an RJ-45 plug, be sure the tab on the plug
clicks into position to ensure that it is properly seated.
Warning:
Do not plug a phone jack connector into any RJ-45
port. This may damage the Wireless 11g Router.
Instead, use only twisted-pair cables with RJ-45
connectors that conform with FCC standards.
Figure 3. Making the LAN Connections