Connect the System
11
Attach to Your Network Using Radio Signals
Install a wireless network adapter in each computer that will be
connected to the Internet or your local network via radio signals.
Rotate both antennas on the back of the Wireless 11g Router to
the desired position. For more effective coverage, position the
antennas around 45 to 90 degrees apart. Try to place the
Wireless 11g Router in a position that is located in the center of
your wireless network. Normally, the higher you place the
antenna, the better the performance. Ensure that the Wireless
11g Router’s location provides optimal reception throughout your
home or office.
Computers equipped with a wireless adapter can communicate
with each other as an independent wireless LAN by configuring
each computer to the same radio channel. However, the
Wireless 11g Router can provide access to your wired/wireless
LAN or to the Internet for all wireless workstations. Each wireless
PC in this network infrastructure can talk to any computer in the
wireless group via a radio link, or access other computers or
network resources in the wired LAN infrastructure or over the
Internet via the Wireless 11g Router.
The wireless infrastructure configuration not only extends the
accessibility of wireless PCs to the wired LAN, but also increases
the effective wireless transmission range for wireless PCs by
retransmitting incoming radio signals through the Wireless 11g
Router.