manualshive.com logo in svg

Arcadyan Technology Corporation WG4005D-ZZ, Manual, Page: 17 / 100

Share
Download
Arcadyan Technology Corporation WG4005D-ZZ Manual Download Page 17

System Requirements

7

System Requirements

You must have an ISP that meets the following minimum 
requirements:

•

Internet access from your local telephone company or Internet 
Service Provider (ISP) using a DSL modem or cable modem. 

•

A PC using a fixed IP address or dynamic IP address 
assigned via DHCP, as well as a gateway server address and 
DNS server address from your service provider.

•

A computer equipped with a 10 Mbps, 100 Mbps, or
10/100 Mbps Fast Ethernet card, or a USB-to-Ethernet 
converter.

•

TCP/IP network protocol installed on each PC that needs to 
access the Internet.

•

A web browser, such as Microsoft Internet Explorer 5.0 or 
above installed on one PC at your site for configuring the 
Wireless 11g Router.

WAN Port

WAN port (RJ-45). Connect your cable modem, DSL modem, or 
an Ethernet router to this port.

Reset Button

Use this button to reset the power and restore the default factory 
settings.

LAN Ports

Fast Ethernet ports (RJ-45). Connect devices (such as a PC, hub 
or switch) on your local area network to these ports.

Item

Description

Summary of Contents for WG4005D-ZZ





































































































Reviews:

No comments