USER MANUAL
ARC
LAST UPDATED: 3/08/2018
17
As there are only two components that require installing on the handlebars,
this stage of the installation is quite simple.
To install the thumb throttle, remove one side of the handlebar components
(like your grip and brake lever) and slide the thumb throttle into the position
that is most suitable for you. There is a small Allen key on the bottom side of
the throttle that tightens the device to the handlebars once you find a position
you're happy with. Ensure that the place washer is inserted as well. This
prevents the thumb throttle from getting stuck on other components. Connect
the yellow plug to the matching plug from the handlebar bag.
To install the display, loosen the screw in the clamp, clamp the display onto the
handlebars, and tighten the screw back up. Connect the green plug to the
matching plug from the handlebar bag.
ASSEMBLY—HANDLEBAR COMPONENTS
