USER MANUAL
ARC
LAST UPDATED: 3/08/2018
10
Now that the bicycle has been prepared, the motor can be mounted on the
bicycle.
ASSEMBLY—FRONT MOTOR
Remove the motor from its packaging if you have not done so already. At this
point you can remount the tyre and tube, making sure you get the direction
right. This is typically marked on the side of tyre tube. The motor has a cable
coming out of the right side which may help you get the correct direction.
If you have removed a disk brake in the previous section, you should remount it
on the motor now. To do this, you can remove the Allen key bolts from the
motor as shown above. The motor has a plastic spacer in the position of the
disk brake as a placeholder. Remove this and mount the disk brake in position.
Be sure to tighten the bolts evenly all the way round.
