Arbor Technology M1922, User Manual

Page: 62 / 90

- 46 -
Using the Computer
3.9 Using the RFID&NFC Reader (Configure-to-
Order)
The RFID&NFC reader is a Configure-to-Order Service (CTOS) on the
computer and can be identified by a label on the lower right corner of the front
bezel.
RFID/NFC detection area
Once the driver for the RFID&NFC reader is installed, then it is ready for use.
You may use your own RFID&NFC application. However, you can optionally
use the provided test program to test if the reader functions properly. The test
tool is installed when you installing the RFID&NFC reader driver.
1. To launch the test program:
• Double-tap the
RFID NFC Demo
shortcut icon on the desktop.
• Or, you can launch the test program by tapping Start > All programs
> RFID > NFC_Demo > Demo AP on Windows 7 or All Apps list >
NFC_Demo > Demo AP on Windows 8/8.1.
2. The RFID Demo AP then opens, with the Status column showing
Disconnected .