male
BNC connectors, which connect directly to the 940A.
Twisted Pair Cable
To adapt a twisted pair of wires to the female BNC input connector
on the Model 940A, use a BNC breakout as pictured in Figure 2.
Figure 2: Male BNC Breakout with Terminals
Connecting
Connect the breakout’s male BNC connector to the 940A, then at-
tach the twisted pair of wires to the breakout terminals and tighten
the screws.
Make sure to observe the polarity marking on the
breakout.
Do not tin stranded wire with solder.
6
Summary of Contents for 940A
Page 10: ...x ...
