48
The Setup Menus
to escape the configuration process if necessary. After this introductory material, each menu is
covered in detail.
7.1.1
To Begin Configuring
Press the SETUP key to enter the clock configuration menus, starting with communication port
parameters (Set Serial COM1?).
SETUP
: Press the Setup key repeatedly to scroll through the main menus. Also, after pressing
SETUP once, you can press the UP or DOWN keys to scroll the menus. In numeric data entry
mode, pressing SETUP moves the cursor to the left.
ENTER
: Press the Enter key to confirm changes made within SETUP menus. Generally, pressing
ENTER also advances the next parameter, or returns to the previous menu level. In numeric data
entry mode, pressing ENTER moves the cursor to the right.
UP
: Press the UP key, within the SETUP menus, to adjust numerical values upward, or to scroll
upward through the available menu choices. The UP key also assists in navigating through main
Setup Menus in normal order.
DOWN
: Press the DOWN key, within the SETUP menu, to adjust numerical values downward, or
to scroll downward through available menu choices. Also assists in navigating through main Setup
menus in reverse order.
7.1.2
Numeric Data Entry Mode
Numeric data entry mode is activated anytime you enter a menu that requires a change in numerical
value. When in this mode, the function of the SETUP and ENTER keys change to give left and
right cursor control.
7.1.3
Default Firmware Settings
When shipped from the factory, and unless specified otherwise, the Model 1094B will be configured
with a default set of values and features. This set of values and features are configured primarily
through the front panel, lower row of keys, and alternately through either communication port.
These default settings are listed in Table 7.2 below. For menu order, read table from left to right,
and down.
7.1.4
To Exit Setup Menus
To exit any configuration menu without saving, press any key of the upper row of keys before
pressing ENTER to change a value. To return to the configuration menus, press SETUP again. If
you make a configuration error, you can scroll through the menus again and press ENTER when
you find the menu you want to change.