GENERAL CARE AND MAINTENANCE
By choosing an ARB Bar, you have bought a product that is one of the most sought after 4WD
products in the world. Your bar is a properly engineered, reliable, quality accessory that
represents excellent value. To keep your bar in original condition it is important to care and
maintain it following these recommendations:
Prior to exposure to the weather your bar should be treated to a Canuba based polish on all
exposed surfaces. It is recommended that this is performed on a six monthly basis or
following exposure to salt, mud, sand or other contaminants.
As part of any Pre Trip Preparation, or on an annual basis, it is recommended that a
thorough visual inspection of the bar is carried out, making sure that all bolts and other
components are torqued to the correct specification. Also check that all wiring sheaths,
connectors, and fittings are free of damage. Replace any components as necessary.
Please contact local Authorised ARB Stockist if you would like to have this service carried
out on your behalf.
HAVE AVAILABLE THESE TOOLS WHEN FITTING PRODUCT:
BASIC TOOL KIT
ELECTRICAL TAPE
HACKSAW OR JIG SAW SUITABLE TO CUT PLASTIC
DRILL WITH 10MM HSS DRILL BIT
NOTE: ‘WARNING’ notes in the fitting procedure relate to OHS situations, where to avoid a
potentially hazardous situation it is suggested that protective safety gear be worn or a safe work
procedure be employed. If these notes and warnings are not heeded, injury may result.
FASTENER TORQUE SETTINGS:
SIZE
Torque Nm
Torque lbft
M6
9Nm
4lbft
M8
22Nm
16lbft
M10
44Nm
32lbft
M12
77Nm
57lbft
PARTS LIST
USE
PART No
QTY
DESCRIPTION
CHASSIS BRACKET TO CHASSIS
6151357
6151321
2
2
M10 SEMS HEX BOLT ASSEMBLY
M10 FLANGE NUT
6151322
2
M10 NYLOCK NUT
3758010R/L
1
BRKT ASSY CHASSIS
4581070
2
WASHER FLAT M12
CHASSIS BRACKET TO BULL BAR
6151357
6151321
2
2
M10 SEMS HEX BOLT ASSEMBLY
M10 FLANGE NUT
6151135
4
M12 NUT
4581050
4
WASHER SPRING ½”
6151096
4
BOLT M12 x 40mm
6151097
4
BOLT M12 x 50mm
4581070
8
WASHER FLAT M12
5848380
6
PACKER SHIM
NUMBER PLATE TO BULL BAR
6151017
2
BOLT M6 x 16
6151046
2
WASHER FLAT M6
6151128
2
NUT FLANGE M6
INDICATORS TO BULL BAR
3500080
1
INDICATOR KIT
180302
4
CABLE TIES
